www.longhorntactical.com

Olight M20 R5 is the upgraded edition of the famous Olight M20 R2. With a more efficient and advanced CREE R5 LED Blub, this innovative Olight M20 R5 is brighter (320 lumens)and better runtime performance than Olight M20 R2. Its top notch build quality and well-spaced output and strobe capability will certainly set it apart from the rest of tactical LED flashlights.

Features:

• World-class ultra bright Cree XP-G LED: R5 320 lumen on high !
• Throws a beam up to 306 yards !
• A True low power mode for up to 150 hour runtime !
• Tactical momentary-on forward switch, protruding switch for easy momentary or click to lock on
• Stainless steel striking bezel and rear striking bezel, both removable
• Rugged, nearly indestructible aluminum body with anti-scratching Type III Mil-Spec Hard
• Highly water resistant

Specification:

• Illumination: High (320lm) medium (110lm) low (9lm) Strobe
• Continuous runtime:4hrs (320lm), 12 hours (110lm), 150hours (9lm)
• Battery: 2x CR123A, 2xRCR123A, 2x16340,1 x 18650, 1x17670
• Dimensions: 5.5"/144 mm (length) x 1.3"/33.5mm ( head diamter)x 0.98"/24.80mm (Body diameter)
• Weight: 120.5g without batteries

Package Content:

• 1 x M20 Flashlight
• 1 x Holster
• 1 x Lanyard
• 2 x Spare O-rings
• 1 x Spare fluorescent tail cap rubber boot
• 1 x 1 x battery magazine

Usage and Maintenance:

Tailcap push button has both momentary and constant on functions. A gentle press will activate the momentary function. A full press (click) will lock the light on while another full press will turn the light off. Twist the head of the flashlight for low, medium, high brightness levels, strobe and SOS. (Turn the head of the light 1/8 of a circle clockwise the then back 1/8 of a circle counterclockwise) The last mode used will be memorized the next time the light is turned on. Turn the Tailcap 1/8 of a circle counterclockwise to lock out the light to prevent accidentally turn on. The light will flash to warn you when battery power is low; giving you the opportunity to change batteries or adjust to a lower output level if you need more illumination time.