 |
 |
 |
|
Introducing the Eagletac MX25L2-C-KIT, an upgrade from the MX25L2 in
nearly every aspect. An incredible 595 more lumens brings this light to a
mind-blowing maximum output of 3445 lumens! The CREE XP-L HI LED is
capable of throwing a beam 122 more yards to an insanely long 645 yards.
That's nearly the length of seven football fields laid end to end! A
compact size isn't sacrificed in spite of all these upgrades; the
MX25L2-C-KIT weighs more than two ounces less than its predecessor and
is 1.4 inches shorter, both allowing for easier transportability. This
compact edition of the MX25L2 is still conveniently rechargeable with
its included battery pack. Take your pick among four brightness levels
or seven (!) special modes, and let this light assist you during all
endeavors!
Perfect uses for your light include tactical,
camping, hiking, hunting, caving, searching, or other outdoor activities
that require extreme illumination.
Note: This is the KIT version of the light, which includes: a stainless
steel bezel, ET54II Diffuser filter w/flip cover, a rigid nylon holster
with self-retention device, and a UL/PSE ceritifed 18W wall charger (10V
1.8A).
Specifications: - LED: CREE XP-L HI V3
- Battery Run Time
- Max: 3445-2790 lumens, 1 hour 20 minutes
- High: 1650 lumens, 3 hours 12 minutes
- Med: 381 lumens, 16 hours
- Low: 27 lumens, 200+ hours
- Supported Battery: 2 x 32650 li-ion battery pack (included)
- Maximum Beam Distance: 645 yards / 592 meters
- Maximum Beam Intensity: 87500 cd
- Dimensions:
- Length: 9.1 inches
- Diameter: 1.4 inches
- Weight: 13.4 ounces (381 grams)(without battery)
- Waterproof: IPX-8 standard (submersible up to 2 meters)
Features:- Water-white glass lens with hardened treatment
- Anti-reflective coating on both sides
- Highest efficiency current mode controller from Linear Technology
- Synchronous buck w/ efficiency of up to 95%
- Non-dimming constant current regulation for all output levels
- Very low standby current (uA)
- Turbo boost technology (reduces ouput on turbo 15% if used more than 200 seconds)
- LED direct soldering on copper for maximum heatsink ability
- Power gauge
- Battery reverse polarity protection
- Tail stand capability
Accessories Included:
MX25L2-C Flashlight, ET54II Diffuser filter w/flip cover, rigid nylon
holster w/ self-retention device, UL/PSE ceritifed 18W wall charger (10V
1.8A), spare waterproof charging cap, 7.4V li-ion battery pack (R44)
6000mAh capacity, spare o-rings, 12V car charger adapter w/ 6 foot heavy
duty high current cord, user manual
|
|
|
 |
|
 |
|
