FENIX LD02-V2 At-A-Glance
- CREE XQ-E LED with a CRI rating of 90 for a warm, sunlight like beam.
- E200mW ultraviolet LED for currency & ID verification, inspection, forensics and more.
- 3 brightness levels and UV mode.
- Waterproof up to 2 meters and totally protected from dust & debris.
- Compact body weighs under an ounce (without a battery).
- Utilizes a single AAA battery.
Included in the Box
- Fenix LD02 V2.0
- 1x AAA alkaline battery
- 1x spare o-ring
- User manual
- Warranty card
New UV & High CRI Output Upgrades
The Fenix LD02 V2.0 gives this popular penlight the upgrade treatment, now featuring a UV output for fluorescent detection. By adding a 200mW UV LED, the LD02 V2.0 can be used for identification and currency verification, fluid and grease detection, scorpion detection and plenty more. Fenix also swapped out the primary LED for a CREE XQ-E LED in the LD02 with one that has a CRI rating of 90. The result is a warm, sunlight-like beam that can render colors beautifully. With a 70 lumen max output, that's plenty of light for reading, inspecting and up close tasks.
Designed for Everyday Carry
Take the LD02 V2.0 with you everywhere! Measuring 3.6" long and weighing less than an ounce (without battery), the LD02 V2.0 is ideal for everyday carry and frequent usage. A stainless steel tail switch controls 3 brightness levels plus UV output with a single hand while a fixed pocket clip secures the flashlight for carry. Rated with an IP68 waterproof rating, the LD02 V2.0 can easily withstand all-weather and is even submersible up to 2m.
Powered by 1x AAA Battery
Powered by a single AAA battery (Ni-MH or alkaline), finding batteries for the LD02 V2.0 is easy wherever you go. With a max runtime of 75 hours, you'll get the most out of each charge.
TECHNICAL SPECIFICATIONS
|
LED
|
CREE XQ-E HI
|
|
Maximum Brightness
|
70 lumens
|
|
Peak Beam Distance
|
52 yards
|
|
Peak Beam Intensity
|
580 cd
|
|
IP Rating
|
IP68 - 2m submersible
|
|
Impact Resistance
|
1 m
|
|
Dimensions
|
L-3.6"xW-0.53"xH-0.53"
|
|
Weight
|
0.84oz
|
BRIGHTNESS OUTPUTS
Ni-MH Battery:
|
MODE
|
OUTPUT
|
RUNTIME
|
|
High
|
70 lumens
|
45 min
|
|
Med
|
25 lumens
|
2 hr 55 min
|
|
Low
|
1 lumen
|
45 hr
|
|
UV Light
|
200mW
|
3 hr
|
Alkaline Battery:
|
MODE
|
OUTPUT
|
RUNTIME
|
|
High
|
70 lumens
|
40 min
|
|
Med
|
25 lumens
|
2 hr 40 min
|
|
Low
|
1 lumen
|
75 hr
|
|
UV Light
|
200mW
|
4 hr
|
Compatible Power Sources
|
BATTERY TYPE
|
SIZE
|
NOMINAL VOLTAGE
|
COMPATIBLE
|
|
Ni-MH Battery
|
AAA
|
1.V
|
Yes - Recommended
|
|
Alkaline AAA Battery
|
AAA
|
1.5V
|
Yes
|
|
Lithium Battery (Non-rechargeable)
|
AAA
|
1.5V
|
Yes
|
|
Li-Ion Battery (Rechargeable)
|
10440/10450
|
3.7V
|
No
|
