www.longhorntactical.com

Description

The Olight SR51 is powered by the CREE XM-L (U2) LED and is part of Olight’s high-power series that features extreme outputs. The XM-L LED is truly showcased in the SR51 with a max output of up to 900 lumens and 700 meters throw. Two brightness levels are provided for different illumination application. The SR51 is compatible with CR123A, RCR123A and 18650 batteries.

Features

• World-class super bright Cree XM-L LED
• Max 900 lumens(OTF),700 meters long throw.
• Max 10 hours long runtime
• Two digitally controlled constant brightness levels and strobe
• Anti battery polarity reverse protection
• Two digitally controlled constant brightness levels and strobe
• Rugged indestructible aluminum body with anti-scratching type III hard anodization
• Engineered anti-slip knurling for a tightly firm grip
• Mini orange peel reflector offers perfect beam and long throw.
• Super Strong anti reflex coating lens，99% effective transmission
• Excellent tridimensional heat dissipation ability
• Friendly user interface, press and hold the switch for transferring mode.

• LED: CREE XM-L (U2)
• Brightness levels/Run time

  • High mode: 900 lumens /110 minute
  • Low mode: 250 lumens / 10 hours
  • Strobe: 10 HZ
• Dimension: D63mm (2.48in) *L190mm（7.48in）
• Battery: 6x CR123A or 2x 18650 (Need to purchase optional 18650 battery bracket)
• Working voltage： 4.5～8.4V
• Water proof：IPX-8
• Reflector: Mini Orange peel reflector
• Material：Aluminum Alloy body
• Anti-scratching type III hard anodization
• Weight: 400g ( 11oz)
• Accessories: Includes one strap, one charger, one operator’s manual, one O-ring

• Easy touching switch on the head for turning on/off the light and transferring modes
• When the power on, press and hold the head switch, It will be shut down automatically after 3 level brightness changing, and then release the button. When in locked stated, three times fast press the button to unlock.
• Battery Installation: Unscrew the tail cap and remove the battery bracket. Install the batteries in the proper direction, with the positive terminals on the positive side, and the negative terminals on the negative (spring) side.
• Turning On / Off To turn the flashlight on, press the power button once. To turn the flashlight off, press the power button once more.
• Lock-out Mode To put the SR51 into lock-out mode, press and hold the power button and let the output cycle high-low three times. The flashlight will then turn off. It will be “locked-out” and unable to turn on accidentally unless you rapidly press the power button three times.
• Changing Output Press and hold the power button to cycle between high and low modes. Quickly double-press the button (when ON) to change to strobe mode. Double-press the button to leave strobe mode.